Alpinestars Meta2 Supertech S-M10 Helmet
- Collarbone protection is an important design feature of the Supertech M10 helmet shell base profile.
- The base of the S-M10 has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (Clavicle).
- Also, incorporated into the area of the base pad, where it sits over the rider’s collarbone, is an energy absorbtion pad; a more flexible compound rubber section which allows deflection when it contacts the Clavicle.
- The Supertech M10 chin-bar is formed with polypropylene which, by allowing for a degree of lateral deflection, further improves impact protection for the collarbones.
- Post-crash protection mechanisms are also a key feature of the Supertech M10 design, allowing rapid and safe intervention if the rider has suffered a major impact.
- Multi-Directional Impact Protection System: MIPS.
- MIPS is incorporated into the Supertech M10 to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain.
- A low friction ‘slip’ layer is incorporated into the Supertech M10 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell.
- When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorbtion layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion.
- Emergency Release System (ERS).
- The side cheek padding of the S-M10 can be extracted efficiently and safely, while the helmet is still on the rider’s head, to allow ease of removal by trackside support and medical staff.
- The Supertech M10 is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell.
- Along with the ERS padding removal, ‘Eject’ allows for emergency removal of the helmet, without putting load on the rider’s spine.
- Chin-strap: Wider than certification requirement: 26 mm for comfort and produced with a woven poly yarn to give a soft ‘hand’ feel that connects securely with a double D-ring.
- Weight: Reduced by design while allowing the Supertech M10 protection to be class-leading.
- Weight is both a factor in riding performance and safety in a helmet and to ensure the S-M10 offers the ultimate in weight saving performance enhancement, the material selection, preparation and construction of the helmet has been rigorously analysed for weight to strength and energy absorbtion properties and a strict analysis of all the components used in the Supertech M10 finishing.
- Weight of S-M10 is 1240g for size Medium (ECE) - 1340g for size Medium (DOT)
- The Supertech M10 helmet versions conform to both DOT certification and ECE homologation for use worldwide.
- The DOT 218 standard prescribes specific impact penetration protection over the crown of the helmet area and hence, for the US and Canada markets, the Supertech M10 will feature technology that substantially exceedes the minimum safety requirements.
Alpinestars approach to the creation of the advanced technology in the Supertech M10 draws on its depth of experience from over half a decade of world class innovation across the spectrum of motorsports and especially, its deep-rooted commitment to motocross. As with all other categories of technology that Alpinestars has mastered, bringing a new, highly complex, product to fruition requires specialist experience and know-how and a project plan led by the best brains in protection development.
Hence Alpinestars Helmet Development Department was created and given the brief to research and develop the most protective, most comfortable and lightest possible motocross helmet. The goal was to allow riders to push the limits of performance, benefiting from confidence inspiring safety technology, reduced weight distribution to minimize muscular effort in the neck, shoulders and back and improved physiological and cognitive performance with a supremely well-fitting and well-ventilated construction, optimizing comfort while riding. The design is coherent to Alpinestars philosophy and shares distinctive themes with other products in the portfolio; a smooth, attractive, profile which is streamlined and free of any external channels and features that might act as a load point in an impact, or compromise the overall integrity of the construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column. The aperture is designed to accommodate a wide variety of goggles and the air vents in the shell are located to maximize ventilation efficiency.
The Supertech M10 shell has been profiled with performance as a priority and with a design style that identifies the profile of the helmet and its sculpted surface as uniquely ‘Alpinestars’.
Product Line Alpinestars Meta2 Supertech S-M10 Helmets Part Number 8300422-1549-LG Fitment Type Size-Specific Fitment Use Type Off-Road Gear Unit Sale Qty Each Style Size Large Age Group Gender Unisex Position Material Carbon Fiber Color Black/Yellow/Orange Finish Product Disclaimer Fitment Note See fitment chart in images for measurements to ensure best fitment Fitment Note Fitment Note Fitment Note Fitment Note
Items will be shipped within 1 business day from the date of purchase to the address provided. Orders submitted before 3PM EST will often ship the same day. We will use an appropriate shipping service and/or carrier based on the shipping service selected at checkout and can not be changed/upgraded/modified in any way once the order is submitted.Shipping Address Restriction
If your address has a carrier restriction and is not serviced by one or more of the US domestic carriers (USPS, UPS or FedEx), then it is YOUR RESPONSIBILITY to notify us of this restriction at the time of purchase with either an order note entered before checkout, or a direct message within 15 minutes of order submission.International Purchases
All items shipped internationally will be shipped with customs declaration of purchase value; ALL duties/tariffs/fees imposed by the destination country are the buyers responsibility and are NOT calculated or imposed by us at any level and we are not liable for any additional cost that your destination country imposes. Often, these fees are due prior to or at delivery of the shipped product/s and are not subject to negotiation. If you have questions about the calculation of the fees, please contact your home nations customs/import agency for additional details as we have no control over how these amounts are calculated.
All orders must be paid in full before an order can be shipped. Cost of any additional shipping service upgrades are due at the time of checkout and can not be added once the order is complete. Certain destinations are subject to sales tax which is calculated and applied to the order total before checkout and order submission.Part Compatibility Policy
Application specific parts will have part compatibility indicated in the "Fits" or "Fitment" section of the product description and will be provided for all application specific products. These fitment indications are sourced from the product manufacturer and may be subject to change. Please be careful in reading any/all fitment indications for exact Year-Make-Model-Sub Model indications to make sure the part ordered will fit your exact application/s. If you are uncertain about a part compatibility and will to clarify before purchase, please feel free to message us at anytime and an experienced support staff member will assist you in verifying fitment to his/her best ability.Image Policy
Product specific images displayed on listings will be provided IF available, and when not available, a generic (non-specific) image will be provided that represents the general product type listed. Listing images should not be used as the exclusive basis for making your purchase decision and it is the customer responsibility to review the product description and all fitment indications before adding the item to cart.Return Policy
At SVS Powersports we understand that a product does not always look, fit or function as expected. If such a situation arrises, we do accept returns of all Unopened, Unused items with original packaging within 30 days of purchase/delivery. If your item is damaged, defective or completely different from the item ordered, please DO NOT submit a return request, please contact our knowledgable support staff with a clear description of the issue and someone will get back to you in a prompt time frame.
At SVS Powersports we are proud to offer unparalleled level of customer support and if any question or issue should arise, do not hesitate to contact us at any time. We have a very experienced and knowledgable support staff that can assist you with virtually any inquiry. Support staff is available 6 Days a week (Monday Thru Saturday) 10AM to 6PM EST by calling 1-800-787-5817 OR via email at firstname.lastname@example.org with most inquiries responded to within less than an hour during our staff support hours. If you contact us outside these hours, we may still get back you right away, but a response may be delayed until the next business day.
We Also Recommend